Description:
control
board for multi-rotor aircraft (Tricopters, Quadcopters, Hexcopters etc) so as
to stabilize the aircraft during .
High
performance, easy and convenient to use.
Updated to
an incredibly sensitive 6050 MPU system making this the most stable KK board ever
and allowing for the addition of an auto-level function.
Uses signals
from your radio systems receiver (Rx) and passes these signals to the
Atmega644PA IC via the aileron, elevator, throttle and rudder inputs.Once this
information has been processed the IC will send varying signals to the ESCs
which in turn adjust the rotational speed of each motor to induce controlled
(up, down, backwards, forwards, left, right, yaw).
Size:Approx.51x51x12mm/2x2x0.47inch
Specification:
Built-in
mode:
Dualcopter
Tricopter
Y6
Quadcopter +
Quadcopter X
Hexcopter +
Hexcopter X
Octocopter +
Octocopter X
X8 +
X8 X
H8
H6
V8
V6
Aero 1S
Aileron
Aero 2S
Aileron
Flying Wing
Singlecopter
2M 2S
Singlecopter
1M 4S
IC:
Atmega644 PA
Gyro/Acc:
6050MPU InvenSense Inc.
Auto-level:
Yes
Input
Voltage: 4.8-6.0V
AVR
interface: standard 6 pin.
Signal from
Receiver: 1520us (5 channels)
Signal to
ESC: 1520us
Firmware
Version: V1.17S1
Package
Includes: